Australian RC Forums banner

1 - 9 of 9 Posts
G

·
Discussion Starter · #1 ·
ok i got the TL01 goen yesturday, today i gave it a few runs....but it
seems that when i turn left..the car is really planted and seems to
push a little bit...but when i turn right its like i loose all traction
in rear, and it does a 180, if not, it does a really sharp turn.....

ive tried put some spacer clip thingys on the front left shock, to harden it a bit...that didnt work...

anyone know how i can fix it??..

thanks

Nismo
 

·
Registered
Joined
·
596 Posts
check yours shocks . You may need to top up the shock oil or clear out some air bubbles
 

·
Premium Member
Joined
·
6,579 Posts
Could be a jammed bearing on the right side, or something as simple as tightening your wheelnuts too tight... gotta watch those TL01/M03/FF02s!
 
G

·
Discussion Starter · #4 ·
well ive checked all shock, make sure all lenght...no binding or anything..will take it for a spin soon..



thanks guys



Nismo
 
G

·
Discussion Starter · #5 ·
arghhh still got the problem, it had gone for a while...no its back..AGAIN!!




ok, im running foam tyres, with oil shocks...tierods etc....and its
still doing it, i did a few adjustments with the shocks a while ago,
will take for a spin tommorow



Nismo
 

·
Premium Member
Joined
·
6,579 Posts
Foam tyres can do funny things to handling when they are worn and are all different sizes. Also you might be running on different compounds of foam; foam also dries out with age and goes harder = less grip.
 
G

·
Discussion Starter · #7 ·
yes true, but i use them just to bash out the front so i dont really mind..

but even with tyres it still has the prob



ahhhh well



Nismo
 

·
Premium Member
Joined
·
6,579 Posts
If you've gotten those foams from off a gas car, one could be oil-soaked too.






Suggest try rotating them - put the Left Front one to the Left Rear corner.
 
1 - 9 of 9 Posts
Top