Australian RC Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hey i just put a hitec hi torque digital servo in my savage xl. but the spline on the servo is different to the horn for throttle and brake. Are there other horns out there so i can use the expensive servo i just bought?
 

·
Premium Member
Joined
·
9,488 Posts
If you bought your truck new and still have the bag of goodies that came with it from new, there is a new steering horn and throttle horn in that bag of parts. The Hitec throttle horn should have the number 24 on it, and the steering will have either 24 or Hi on it.

Simple job to fit as well, just make sure to fit the servos first, and power them up to get them to neutral, set the trims to "0" and then drop the horns into postion and tighten them down.

Final step is to take the beast out the front and have some fun.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top