Australian RC Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
405 Posts
Discussion Starter · #1 ·
Hi,


I'm after a part number or even advice to what the following part is actually called (come to think of it - it's probably in the Savage manual) just so I know roughly how much I'm up for when I come to replace it. (And I know what to ask for)


I've got stripped teeth on the gear in the diff housing which is attached to the end of the input shaft.


Could someone help me find the part?


Jerrah.Edited by: jerrah
 

·
Premium Member
Joined
·
2,880 Posts

·
Registered
Joined
·
405 Posts
Discussion Starter · #3 ·
That looks like the one:


# 86031


I have disconnected the front dogbones and fitted the replacement spur gear - I just hope my mesh is good enough because I don't want to strip another one immeadiately. :) Seems ok - not too tight, not too loose.


Jerrah.
 

·
Registered
Joined
·
166 Posts
hi look on ebay MRC has some on there but hurry cos i might get them!!!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top