Australian RC Forums banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
4,136 Posts
Discussion Starter · #1 ·
Gidday all,


I've just finished mounting my new Dynamite pipe for the Terra Crusher at the rear of the truck, This means the fuel tubing from the tank to the exhaust is considerably shorter than when it was a stock pipe mounted to the side.


Is there anything I should know regarding the required length of this fuel line?


Thanks,


Steve
 

·
Registered
Joined
·
761 Posts
keep the fuel line longer, im pretty sure the longer the line is the easier it makes it to pressurize the tank and to get fuel flowing around the tank to the carb


im not sure if thats right
, but either way keep the line long
 

·
Registered
Joined
·
204 Posts
Yes, a longer line is best.

A short pressure line can cause foaming of the fuel from due to the pulsing of the exhaust gas and also can cause air in the fuel line which results in inconsistant tune.

Try to keep the line at least 15cm in length.

Cheers,
Shaun.
 

·
Registered
Joined
·
761 Posts
do you mean each fuel line 15cms? i have 3 seperate lines so do i need at least 45cms of fuel line on my truck?
 
1 - 4 of 4 Posts
Top