Australian RC Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
I haverun through three tanks of fuel in my Picco BUT


every time i touch the throttle it just dies. I think its way to rich


my settings are HSN 4.5 turns out


LSN - i tried it at 8 turns out and 9.5 turns out.


What are you guys using with your piccos.


It nevergot above 180F during these tanks.


I have sealed the carb and needles.


and my mate broke my pull start. F&%K it!Edited by: Seanie
 
G

·
if as soon as u give it throttle it's dies...... it could be two things it's either to lean or to rich to find out u must listen to how it dies if it just stops it or speeds up a bit it's to lean.if it start choking or struggling to keep going it would be to rich.


the same thing was happening on my ultima it was to lean


p.s try and get temps over 200 it won't hurt the motor and will give u more power don't exceed 250
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #3 ·
Cheers.


I know about the temps thing. I was just mentioning how good the motor in.


My NTC3 runs at about 220-240F
 
1 - 3 of 3 Posts
Top