Australian RC Forums banner
1 - 20 of 21 Posts

·
Premium Member
Joined
·
2,880 Posts
Discussion Starter · #1 ·
Guys,


Dan and I have organised a last minute bash session for tomorrow morning (Sunday 18 July) at Wynnum BMX Track.


Dan, his brother and myself are all confirmed, so if you want to join us, see you at 9.30am tomorrow morning.


Regards,


Chris
 

·
Registered
Joined
·
270 Posts
BAHHH!!!!


Great notice guys.



How do i get there from the Sunny Coast??
 

·
Registered
Joined
·
761 Posts
When are you guys stayin till? I might see if i can come along later on in the day..
 

·
Registered
Joined
·
561 Posts
The red arrow shows the whereabouts of the bmx track



 

·
Registered
Joined
·
477 Posts
if any of u guys have a spare 15t or 16t clutchbell please tell me!! and could i borrow it for the day??





as i could catch the train up..and arrive at cannon hil station at 9:42am..
 

·
Registered
Joined
·
472 Posts
jus as i get my evader going good i get assignments grrr....thats another thing, next bash day should be near a train station or bus stop, as if the next one is anywhere near todays one, my folks wont drive me or nick
so public transport is a must
 

·
Registered
Joined
·
477 Posts
so how was today ausrc, dan, braze etc..


i heard every truck broke except for dan's....





now picys please
Edited by: X
 

·
Premium Member
Joined
·
2,880 Posts
Discussion Starter · #8 ·
X,


Braze - Cracked Fuel Tank
Dan's Bro - Seriously Smashed Fuel Tank
AUSRC - Stripped Spur
Dan - OK, but front diff needs a look (Was the last one stading)


Dan has some pics, hopefully we might see them later.


Regards,


Chris
 

·
Registered
Joined
·
561 Posts
My truck broke today, I smashed a rear 13 tooth in the rear and fixed it in the field




My brother smashed a fuel tank and also broke the plastic piece that
the tie rod screws into next to the wheel. He fixed the tie rod thingy
by swapping the piece with the other side of the truck.



I will post some pics shortly .....
 

·
Registered
Joined
·
477 Posts
aus- didnt u have a spare spur?





sounds like the jumps loved fuel tanks..


u guys gonna go back to this place soon? as i wanna go



Edited by: X
 

·
Registered
Joined
·
561 Posts
Ok here are a few pics of todays last miniute bash .....







Braze flying over the main table top







AUSRC over the same table top







My brothers Matts busted plastic thingy







AUSRC's toothless spur gear







Group Photo







AUSRC jumping over my truck







Matty and BRAZE playing catch me if u can







Mattys rig in mod flight









My truck














A pic of AUSRC's truck flying but u can also see the number of jumps at
the tingalpa track. All the trucks were broken b4 we got a chance to
get to the mountain bike jumps.
 

·
Registered
Joined
·
477 Posts
aweosme pics









now can someone organise a bash on the 15th of august at that trakc?? a sthats the only available weekend that my dad hasnt got something on..and i really wanna go lol..
 

·
Registered
Joined
·
405 Posts
What broke on the two other trucks Dan?



I was dying to get out, but I was previously engaged.
Turns out I
couldn't have run my Savage anyway, when I was pulling the clutchbell
off I found my B021 bearings were stuffed (middles seized to the S25
shaft - and the balls just fell out as soon as I took the cluchbell
off. My clutch shoes were melted too, I'm due for some new clutch bits
before I can start the Picco.



On the note of breaking RC parts I had a brief crawl of my TXT-1 on
Saturday and I burnt out my front 645MG servo in about 10 minutes...
Now running on the Savage HS-2 stock steering servo at the front...
 

·
AUSRC Moderator
Joined
·
6,275 Posts
WOW!! That place may even be worth a plane trip.... 'sides then Jerrah could get some action shots of my truck to post.
 

·
Registered
Joined
·
405 Posts
Skidd said:
WOW!! That place may even be worth a plane trip....
'sides then Jerrah could get some action shots of my truck to
post.
Yeah it's a great bash spot, and fairly central too! It would be
my pleasure to photograph your Savage Skidd.
Though if my Savage was
working I wouldn't have my hands on the camera much.
 

·
Registered
Joined
·
709 Posts
ROAD TRIP!!!!!! ahhh EDIT HERE:MELBOURNE MEET?SOUTH MORANG MEET NEXT SUNDAY IF ALL RUNNING>???
 

·
AUSRC Moderator
Joined
·
6,275 Posts
jerrah said:
Skidd said:
WOW!! That place may even be worth a plane trip.... 'sides then Jerrah could get some action shots of my truck to post.
Yeah it's a great bash spot, and fairly central too! It would be my pleasure to photograph your Savage Skidd.
Though if my Savage was working I wouldn't have my hands on the camera much.

LOL... well mate, if your meets are anything like our meets nobody really runs for the entire day.



Generally it's only a matter of a few hours before someone retires with something that's not a trackside repair. Although I must admit that my spares box now has most things covered.


This weekend between all of us we were able to fit the following spares to keep running; one-way bearings, rotostart housing screws (2 different people), 40 series rims, 1st speed gear in tranny, replacement diff, spur gear, front dogbones (x2) and that's only the stuff that I know about.Edited by: Skidd
 

·
Registered
Joined
·
1,096 Posts
Bah, I wish I had my own puta but then again the tl01 was in pieces. Oh well i can wait til bash day.
 

·
Premium Member
Joined
·
2,880 Posts
Discussion Starter · #19 ·
X said:
aus- didnt u have a spare spur?

Yeah, but because I got there late, the other lads where packing it up when this occurred, so I though - stuff it - I will go home too....


Regards,


Chris
 

·
Premium Member
Joined
·
5,045 Posts
foolSp33d said:
ROAD TRIP!!!!!! ahhh ?

Thats what im thinking, in skidds chevvy while we watch xxx monster truck dvd's in the bask



Looks like a sweet bashing ground though, and some nice "action" shots.


Dan, your fantom running? Im having a few probs with mine, temp issies and a possibly worn/dodgy backplate bushing(tonns of oil pouring out)
 
1 - 20 of 21 Posts
Top