Australian RC Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello, I've got my hands on some RC equipment but don't really have any idea what i'm doing. At the moment I just want to do something really simple like being able to control a servo.
I have spend quite a lot of time looking around on the internet for simple guides I can understand but with little luck. After looking at some sites this one seemed a friendly (and Australian) place to start. Maybe I can build my own helicopter eventually.

Anyway... here's the equipment I have:

I was reading the section on binding in the dx6i manual but it was using a different receiver and also didn't provide a schematic so I had no idea what type of battery to use. I was initially going to use 12V7Ah battery but after reading threads it seems too high.


I figured I could put a servo (or motor controllers) onto one of the channels (THR, AILE, ELE, RUD, GER, AUX) and be able to control it that way.


Anyway, I really think I need to do more reading/research so it would be great if you could point me in the right direction.


Thanks.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top