Australian RC Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
hello fellas


can somebody please tell mewhere to getand how to install this headlight


thanks guys






 

·
Registered
Joined
·
332 Posts
is it a plastic case where you put the leds in, cut out theshell headlights so it looks like real headlights?


or thelights area had the paint scraped off the leds taped inside the shell?


it was raining today so i couldn't be bothered going to dick smith to get my resister..


you will need one if you are using a 9V battery asa power source


rcexotic.comnot working for me atm
 
G

·
hmmmm....ive seen special made ones that plug into the reciever....and
when you brake the brake lights come on.....and they have headlights
and 2 blue fog lights..



Nismo
 

·
Registered
Joined
·
158 Posts
yea nismo this is rcneon they come fully functional reverse brake and headlights, very good setup, lol if ur new to electronics dont open up ur esc, either ask zoomer, or aaron, or microamps would be ur best bet an electrition of ausmicro, they could help u out.
 

·
Registered
Joined
·
332 Posts
heh...cool


i had blue headlights but i now use them as sideunderbody neons and bought white LEDs for headlights...


do you have the braking taillights connected to the ESC?


how much did it cost you?


well leds cost me $10, 180 and 270 ohm resistors 25c, found some wire around the place and a 9v battery...and used the MSC switch :D


spent $15
 

·
Registered
Joined
·
332 Posts
for the taillights cover up parts of it so the light only shines through the correct places and not everywhere


i used masking tape and electric tape over it as it won't stick to the paint by itself


 
1 - 11 of 11 Posts
Top