Australian RC Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
204 Posts
Discussion Starter · #1 ·
Hi Guys,

I stripped down my MBX5 recently to swap the clutch shoes and springs, but ended up doing a full on strip down and rebuild of the entire buggy. Now, after two weeks made up of a few hours here and there, it is finally back together!!

I have fitted a set of Proline Mugshots mounted on the Proline Wasbash Rims, a Proline Performance Wing, new fuel line, Mugen 1.1mm clutch springs, Mugen White clutch shoes, 35wt shock oil in the front and 35wt in the rear, New oil in all the diffs (5k/8k/2k) and a few other bits and pieces. Now it's time to race!!

So she is looking nice and clean, for now...








And here are the URL's for a few more photos...
http://www2.freepichosting.com/Images/421509711/0.jpg
http://www2.freepichosting.com/Images/421509711/2.jpg
http://www2.freepichosting.com/Images/421509711/3.jpg
http://www2.freepichosting.com/Images/421509711/5.jpg
http://www2.freepichosting.com/Images/421509711/8.jpg
http://www2.freepichosting.com/Images/421509711/9.jpg
http://www2.freepichosting.com/Images/421509711/7.jpg
http://www2.freepichosting.com/Images/421509711/14.jpg
 
1 - 3 of 3 Posts
Top