Australian RC Forums banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
4,136 Posts
Discussion Starter · #1 ·
Gidday all..................and happy Easter!


For those who don't know, I have a Terra Crusher with anEpic .18 and a Kippster Racing forward only conversion.


Now that the Epic is broken in, when I give it some serious throttle and try to stop it, it does forward rolls on the tar - not something I want to continue.


When I was running the stock engine, all I had to do was blip the brake and it would stop.


If I adjust the brake back, it doesn't pull up at all.


I am running a single brake linkage which is attached to the brake arm as per the pic which follows.








Edited by: stevo1957
 

·
Premium Member
Joined
·
4,136 Posts
Discussion Starter · #2 ·
Hopefully now that I've read about hosting pics, it will come through this time.


And I should also finish my post..............


If anyone has any ideas about the brake setup so that I can spend more time on my wheels than upside down, it would be appreciated.


Cheers,


Steve
Edited by: stevo1957
 

·
Registered
Joined
·
761 Posts
If thats your stock brake disk, it could be worn out so the calipers just rub against the disk, that happened with my savage so i got a new set and the wheels would lock up easily.


That COULD be your problem, otherwise the linkage might not be set up correct and / or needs adjusting.
 
1 - 3 of 3 Posts
Top