Australian RC Forums banner

Blade nano s2 Shooting up in 3d mode

1K views 0 replies 1 participant last post by  ameersak 
#1 ·
Hi Guys,
I have blade nano s2 and DX8G2 transmitter
all my hovering skills are quite good in sports flying mode. now as soon as i go in 3D mode (stunt 2 on my spektrum DX8G2), the S2 goes flying high on the ceiling non stop! these are the settings as per the manual that came with it. see attached. is there anything wrong in it? in the 3D why does it sky rocket!? the pitch is not controllable. and since its always going up i can;t even hover in 3D mode. and if i cant hover, i cant do a 3D flip even!
can you shed some light on this?


the 3D stunt mode throttle curve is set to all positive 100 for all 5 points and pitch curve is set at 0,25,50,75,100. is these settings correct? why does my heli shoot to the ceiling even when the throttle stick is at mid point!


Thanks in advance
 

Attachments

See less See more
3
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top