Australian RC Forums banner

Charger and Lipo battery for ARRMA Kraton.

8K views 5 replies 4 participants last post by  Moondance 
#1 ·
So I'm about to buy a ARRMA Kraton and I noticed I need to buy a battery and charger separate.

http://www.arrma-rc.com/rc-cars/latest/kraton/blx/story-board

I'm not sure what I need to buy.

On image 32 of the above link it says for max speed I'd need

2x 3s 4000mAh+ LiPo22.2v
1x 6s 8000mAh+ LiPo22.2v

So I'd either need 2x 3s or 1x6s? What would be better to get?
Chargers are another thing, I'm not sure what to get. I'd want it to charge relatively fast and be able to charge 2 at the same time.

Can someone point me to what I need and if possible a supplier were I can order it from in Australia.

Thank you for any help :)
 
#4 ·
Just make sure your LHS has plenty of Arrma parts as I have heard there are issues with parts supply. You are best off going 2x 3S as that will give you more flexibility if you want other cars. However looking at the chassis pics 1x6s would work also.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top