Strongest beadlocks possible?
Results 1 to 8 of 8
\r\n
\r\n
\r\n
\r\n \r\n
\r\n Flexy\r\n \r\n
\r\n Flexy is offline\r\n\r\n \r\n
\r\n \r\n R/C Newbie\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
Join Date
Apr 2013
\r\n \r\n \r\n
Posts
28
\r\n \r\n
\r\n \r\n
\r\n \r\n \r\n \r\n
Rep Power
\r\n
0
\r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n

\r\n Angry Strongest beadlocks possible?\r\n

\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Help please. I have a scx10 I\'m setting up for foff.
\r\nBut I cannot seen to keep the tyres on the rims glued or beadlocks. Has a 3900kv on 3s lipo with stock gearing. Crazy fast and the front end won\'t stay down if I can get traction even with the battery up front. Anyone know some beadlocks that will NOT spit the tyre.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n
\r\n -' + '->\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
\r\n
\r\n
\r\n\r\n'; pd[726897] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n towie964\r\n \r\n
    \r\n towie964 is offline\r\n\r\n \r\n
    \r\n \r\n Senior Moderator\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n towie964\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2009
    \r\n
    Location
    Brisvegas AYE!!
    \r\n \r\n
    Posts
    9,488
    \r\n \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n
    Rep Power
    \r\n
    10
    \r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I have seen this problem arise many times, and to be perfectly honest, no one has ever been able to replicate it front of me....which leads to my question...How are you spitting tyres from bead locks...the wheels should not be spinning any where near fast enough to attain enough rotational mass for the tyre to be able to pull free of the bead lock itself.
    \n
    \nThe only scenario I can come up with is that they are not fixed to the rim tightly enough to begin with..or...the tyre is getting wedged in a pinch like position and too much power is being applied during the release of the tyres as the truck is trying to pull free of the pinch position, as a result the tyre is being stretched beyond normal state and becoming thinner as rubber does under stretch load, and therefore easier to slip from the bead lock groove due to the thinning effect that is happening under the load
    \n\r
    \n\r
    \n\r
    \n\r\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    \r\nBaja...Because Size Matters!
    \r\n
    \r\nEverybody is adding famous quotes to their sigs, so...My Mother to my Father on Disciplining me as a child....You hit him Noel, My Arm is getting tired.
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[726905] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Flexy\r\n \r\n
    \r\n Flexy is offline\r\n\r\n \r\n
    \r\n \r\n R/C Newbie\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Apr 2013
    \r\n \r\n \r\n
    Posts
    28
    \r\n \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n
    Rep Power
    \r\n
    0
    \r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Well I have them tight enough to almost stripping all 24 per wheel. Say to say I\'m sick of re seating the tyres... Is integy a decent beadlock? I head some of there products are crap.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[726921] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n towie964\r\n \r\n
    \r\n towie964 is offline\r\n\r\n \r\n
    \r\n \r\n Senior Moderator\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n towie964\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2009
    \r\n
    Location
    Brisvegas AYE!!
    \r\n \r\n
    Posts
    9,488
    \r\n \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n
    Rep Power
    \r\n
    10
    \r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I wouldn\'t say Integy is the best brand on the market, but some of their gear is OK.
    \n
    \nWith 24 bolts per wheel and the bolts being that tight, unless there is something unusual about the bead locks, I would say you are most likely stretching the tyre under extreme load when trying to get it unstuck from a pinch hold situation, causing the tyre to stretch and pull free from the bead lock.
    \nI would suggest letting the steering loose when in this type of situation and allow the tyre to turn and move freely as you attempt to back out of the tight spot before once again attempting the cross over point you are trying to achieve.
    \n
    \nHope this works for you
    \n\r
    \n\r
    \n\r
    \n\r\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    \r\nBaja...Because Size Matters!
    \r\n
    \r\nEverybody is adding famous quotes to their sigs, so...My Mother to my Father on Disciplining me as a child....You hit him Noel, My Arm is getting tired.
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[726985] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #5\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Flexy\r\n \r\n
    \r\n Flexy is offline\r\n\r\n \r\n
    \r\n \r\n R/C Newbie\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Apr 2013
    \r\n \r\n \r\n
    Posts
    28
    \r\n \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n
    Rep Power
    \r\n
    0
    \r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n It\'s happining when chasing the dog around the yard I know the motor and battery are overkill for this sort of rc but it\'s a good foff platform. I reseated all the beads and took it for a drive, a few wheel stands later it popped the bead it\'s only dead grass so it\'s not getting as much traction as If I was caught in a rock. I have a set of gmade mudrock rims on there way so I\'ll find out if it\'s the wheels or power when they get here. Cheers for the help\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; // next/previous post info pn[726889] = "727489,726897"; pn[0] = ",726889"; pn[726897] = "726889,726905"; pn[726905] = "726897,726921"; pn[726921] = "726905,726985"; pn[726985] = "726921,727489"; pn[727489] = "726985,726889"; // cached usernames pu[0] = guestphrase; pu[11441] = "Flexy"; pu[5094] = "towie964"; pu[3415] = "shorty"; pu[29902] = "robertcladner84"; // -->

    Threaded View

    Previous Post Previous Post   Next Post Next Post
    1. #1
      R/C Newbie
      Join Date
      Apr 2013
      Posts
      28
      Rep Power
      0

      Angry Strongest beadlocks possible?

      Help please. I have a scx10 I'm setting up for foff.
      But I cannot seen to keep the tyres on the rims glued or beadlocks. Has a 3900kv on 3s lipo with stock gearing. Crazy fast and the front end won't stay down if I can get traction even with the battery up front. Anyone know some beadlocks that will NOT spit the tyre.

    Similar Threads

    1. beadlocks
      By damo1275 in forum HPI Baja
      Replies: 8
      Last Post: 15-10-2010, 12:26 AM
    2. Strongest after market parts for brushless emaxx and erevo
      By eRevoKermit in forum Monster Trucks - Electric 1/10 Scale
      Replies: 12
      Last Post: 18-08-2010, 12:20 AM
    3. beadlocks
      By a2btow in forum HPI Baja
      Replies: 7
      Last Post: 17-04-2010, 07:57 PM
    4. CNR Beadlocks for the FG
      By Skidd in forum Large Scale - General
      Replies: 26
      Last Post: 07-06-2005, 07:21 PM
    5. Maximizer Beadlocks
      By twizm in forum Monster Truck - Nitro 1/8 Scale
      Replies: 2
      Last Post: 05-04-2005, 10:10 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •