Hi All,
I've been a member on this forum for a while but haven't done much posting.
I race Large scale at SALS and and have been loving since I started a 2 years ago. There was bit of talk going around about these Hormann HT-3's so I went for a drive to PSR in Adelaide to check them out.
Mike and Bryan done the sale pitch, made me an offer I couldn't refuse and before I knew it I walked out the door with a big box full of goodies
Here's a couple of pics
The box.
What was in the box?
Stickers, and lots of them, a Hormann hat and T shirt.
This is slick! CNC light weight chasis
Side skirts, fuel tank (plumbed) rims and tyres and push rods.
A couple of boxes that looked like this.
The contents of box 1. Lots of goodies in here, nicely numbered to make the building process easier.
The contents of box 2 wing and mounts, air cleaner, front bumper, reciever box and exhaust.
Bryan suggested I try one of the Samba pipes so I grabed one to try.
Front hubs.
Machine work and tolerances are flawless. The bearings 'click' in. A bit of thumb pressure is all that is required. No tapping in with hammers. The front end width can be changed by simply swapping the post from the inner hole in the hub to the outer.
Finally got to bolt some bits to the chassis. A couple test runs before the loctite goes on and all is well.
Everything fits up so snug and the movement is so smooth
Now this is where the fun begins
The instructions are a little bit vague to say the least, plus there are written in German
I did a few 'dry runs' first to make sure I had all the shims and gears in the right place. I will admit that I didn't get it right the first time. It wasn't hard, but it did take a few attempts to get it right.
Clutch bell mounting
Lay shaft and gears
Those two bolted together
Diff
Bag 8
And with the help of magic
It all fits neatly together
Started on the electronics, Servos are in. 2 Rhino Digi 4's on the steering and 2 hitec 7955TG for throttle and brakes.
Steering works a treat and has plenty of power. I recon you could stand on the front and you could get full lock!
Good question! I'll get on to that and report back this arvo.
Sent from my GT-S7500T using Tapatalk 2
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Australian RC Forums
465.8K posts
12.6K members
Since 2003
A forum community dedicated to Australian RC owners and enthusiasts. Come join the discussion about collections, displays, models, styles, scales, reviews, accessories, classifieds, and more!