What fuel and plug to use for new engine break-in
Results 1 to 1 of 1
  1. #1
    R/C Guru mouse's Avatar
    Join Date
    Dec 2009
    Melbourne, Eastern Suburbs
    Rep Power

    What fuel and plug to use for new engine break-in

    I am getting a new engine for my sons truggy and was wanting help on what fuel and glow plug people recommend for breaking-in a 28 engine.

    I have Nitro X race prep 25% fuel here, so should I use this for the break-in as this is what I will be running it on, or use something like the Nitro X 5% break-in fuel? These are the fuels available from my LHS.

    What glow plug would people recommend, hot or cold. My guess would be a hot plug to coup with the rich mixtures. I have OS 8 and OS A5 plugs here.

    I have tried to search for info on this without any luck, so if there is a thread that can help me could someone point me in the right direction.

    Thanks for any help you can give on this.

    Last edited by mouse; 19-05-2011 at 10:48 PM.

Similar Threads

  1. engine break in
    By sticky in forum Large Scale - General
    Replies: 32
    Last Post: 14-09-2010, 08:58 PM
  2. Nitro Engine Break In
    By habana in forum Engine Tuning
    Replies: 3
    Last Post: 30-08-2008, 06:23 PM
  3. Need help engine break in
    By scottz84 in forum Engines
    Replies: 39
    Last Post: 15-02-2008, 07:09 AM
  4. break in fuel help!!
    By hyper7hyperpbs in forum Fuel and Glow Plugs
    Replies: 7
    Last Post: 24-07-2005, 03:07 PM
  5. Wot NOT to do during engine break-in!
    By AussieRCBasher in forum Videos
    Replies: 23
    Last Post: 24-01-2005, 08:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts