Australian RC Forums banner

My Trex 600 Night Flyer

8K views 10 replies 7 participants last post by  Matt Revilo 
#1 · (Edited)
I bulit this trex 600 especially for night flying, this is the second glo wire
set up on this heli, first set up didnt get any photos. I wasnt happy with that
set up so i went a little extreme with 5 drivers, 10 glo-wires, very bright
an awesome look in the sky, but a little too much extra weight, it was like
flying a brick. Tonight i have stripped the heli of all glo-wires/drivers ready
for a lighter set up, 2 drivers/4 glo-wires.











 
See less See more
5
#4 ·
spiralink What no glow wire on the rotors lol.

It really does look cool, a flying brick eh? love it.
Sorry to ruin your day MR Dix, but im running MS Composit night blades
on the Mains & Tail, i couldnt get the glo-wires to stay on the blades whilst flying.

I better make sure i have the blades illuminated in
the next pics:D

Maybe you might like my headband that i made out of glo-wires:D
 
#5 ·
That looks great Spiral. Don't they usually do a different colour on each side so you get orientation better?

Looks sweet though.
 
#9 ·
That looks mad.

I wonder if you will be responsible for any UFO sighting calls from your neighbourhood!!!

Good job. The next thing you need is the same setup on your clothes, so people can associate a glow in the sky with a glow on the ground!

What was the difference in flight time, due to the weight difference?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top