Australian RC Forums banner

Billys new toy

25K views 91 replies 22 participants last post by  stephoon 
#1 · (Edited)
Just picked up my new mcd v3.This is going to be my new car for the summer series at sols,yes I know we've just started winter but I already have the redcat and baja for those so this is going to be built up in the coming months.At the moment it is just a roller so here are pics of it today I will add pics and posts as I add the other bits,at the moment it is just on 8kg.:preggers:
 
#92 ·
That's happened to me before at the track. The front shaft from the centre diff's pin have slipped out from the grub screw being loose. After that days racing, I dismantled the whole car apart to the chassis. Found a lot of grub screws being loose from the dog bones to the drive shafts. Even the screws that hold both front and rear diff was nearly out.

Good luck with it all billy and hope you find the culprit and let us know what it is if you do find it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top