Australian RC Forums banner

Arrrgh! Need help with NTC3 2 speed!

1K views 0 replies 0 participants last post by  Guest 
G
#1 ·
very odd gearbox problem.......


I accidently got wd-40 in by 2 speed which stopped it from shifting into second. (engine would just peak) So I took it apart cleaned it all, gear bell especially and put it all back together by the book! Now I'mASSUMING it's taking off in first, but when it get's to where it should shift the revs jump like it the car is off the groundand I seem to lose acceleration, although it's hard to gauge as I jump off the gas when the revs jump, I've got the screws set to the factory setting, it's shifted fine in the past but since cleaning it and putting it back in it's been playing silly buggers... anyone had similar problems or know of solutions? it's driving me nuts!!!!
 
See less See more
3
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top