RAMTech-RC introduces theSidewinder Rim forMaxx, Savage and Monster GTowners. These 3-D wheels aremade from 6061-T6 billet aluminum and are stock size withzerooffset.Choose from4 different finishes, Satin, Blue, Purple, and Chrome.Each setcomes with4 wheels, built to lastduringBashing. This is theonly wheel for first place at the shows! Shipping is $8.00 to anywhere in the USA.
The Chrome rims are polished, then chromed. They have 1 air hole drilled, and rubber bands protecting bare aluminum in the tire grooves. Remove the bands toglue the tires to bare aluminum, without sanding or roughing up the Chrome.
Due to the Extemely High Bling Factor, we are sending a pairof free sunglasses with every Chrome Sidewinder ordered from this site!!
Many more great RAMTech products can be found at: http://www.ramtech-rc.com/
Morphy.Edited by: AUSRC
I'm not sure if that is directed at me or just a general observation. As it's the 1st time I've mentioned spinners (on this site) I'm guessing it's a general observation.
The spinners are just the latest trend and the ultimate in 'bling'... if you are after maximum blingage then they are hard to beat. Having been around inthe States for a few years now they are only fairly new down here and like all new novelties peeps will latch onto them... remember fuzzy dice, I never did get them either.
I must say that I actually likethe look of spinnerson certain 1:1 vehicles but I can't imagine them on a Savage.
Emailed themyesterday to get a the postage charge. Depending on the answer, I am interested. I am looking at the Viper 40s. I will then put a set of 40 Series Road Rage on them.
Ijust told Chris that I would do 20% off my site prices if you can get a few people together to order at the same time. Or, if you could convince your local hobby shop to place a larger order, I would send them for free.
Iwish I had some vacation time coming, or I would deliver them myself.
Ijust told Chris that I would do 20% off my site prices if you can get a few people together to order at the same time. Or, if you could convince your local hobby shop to place a larger order, I would send them for free.
Iwish I had some vacation time coming, or I would deliver them myself.
Welcome to the site and thanks for posting... Mmmmm the problem now is that I have more things to spend my money on. Just as the Aussie dollar dips yet again. Dayum!
You have some sweet looking products - would love to make a sweet show truck with thoes sidewinder rims. Hey would it be hard to set your cnc machine to make them to suit a 40 series tyre?
Oh and thanks for your generous offer. The Support from campanies like RAMTech-RC is always appreciated.
RAMTech-RC said:
Iwish I had some vacation time coming, or I would deliver them myself.
I might be interested in a set??? Ill see how the next few pay weeks go. Where was this offer when the aussie dollar was at 80c!!!!!!!!!!!! I think its back down to 72c or something crap like that
Have you had any feedback about how the chrome will hold up to the bashing, I know on my 40 series velocities the plactic is chipped, scratched and dentes, so they are going to be abused. The wheels just look too nice to be ruined, what do you think? Any feed back from guys running these wheels would be handy. By the way im looking at the 40 series sidewinders, very nice
Morphy, I ahve the sidewinders in 40 series already.
As far as the Chrome strength, it is real automotive chrome, and is very strong. It will chip if you bang into a rock sideways, so it really depends on how you bash. But Chrome is very easy to clean, so alot of people like it for that.
LOL... As I've said before mate, this ain't a contest.
I really wish I'd just bitten the bullet and done this first up. I'll let you know how they hold up to bashing but my initial thoughts are after going down the Proline path with both Outback Welds and Velocities I have been dissappointed. I was annoyed enough to send them back to proline and exchange them... cost me $40 in postage but I wasn't going to let them get away with it!
Husky, tOiletduck and I have all broken Proline rims and if these things prove immune to damage then the cost will be well worth it.
Touching wood, AUSRC and myself are still using our
undamaged Outback Welds. The only damage to mine is missing chrome on
the outside ring from colliding with things.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Australian RC Forums
465.8K posts
12.6K members
Since 2003
A forum community dedicated to Australian RC owners and enthusiasts. Come join the discussion about collections, displays, models, styles, scales, reviews, accessories, classifieds, and more!