: kyosho caliber 30



david69
11-07-2013, 04:27 PM
Hey all,Just picked up a just test flown only old kyosho caliber 30 with a mds 38 engine,it is like brand new..ive heard that mds are not very good engines.i previously had a rapter 30 and the engine tt pro 39 was faultless.just wondering the mds 38 shaft does not have a thread on it.the fan is a push fit and held on with 2 allen bolts.i want to install a tt39 but the shaft is different.any ideas.thanks in advance.

Peter
11-07-2013, 09:22 PM
I'd think the MDS38 would be far better than the TT motor ..

Are you sure there's no thread on the motor shaft ? there should be!!

Jim621
14-07-2013, 09:15 AM
Hi David,

If the heli is 'like brand new' like you say, i would just fly it as is.
If you havent had any issues with the engine so far, i wouldnt bother changing it out until you start having dramas with it.

90% of engine failures dont just happen without warning - the engine will show signs like becoming noisy, getting hard to start, having rough idle etc.

Just fly the thing and enjoy it!
Steve