Australian RC Forums banner

Rampage Mono / J&G with CC Mods

12K views 36 replies 15 participants last post by  Grazacind 
#1 · (Edited)
Don't have time to build an rc boat at the moment, I called
Carlo from CC racing, i decided on a RTR Rampage Mono with
a J&G rear exhaust engine with CC mods, should be fast!!











 
See less See more
5
#12 ·
Yeah Benckie, at least a couple of weeks.

Vinyl Wrap To Be Fitted To Top Deck- Green Redbull Design
Engine & Mounts to be fully polished
Pipe to be Ceramic Coated


Will then post some videos

I will also be fitting the shredda fin system to do some speed tests,
if i get some promising results, will let you know.







 
#13 ·
its a sweet looking boat and it will rip all top shelf poducts used :)

im intrested in the shredda fin system and let me know how you got with the shipping, ive brought in one rtr baot from the usa and one cat hull, not cheap on the shipping

this thread makes my quickdraw seaducer refit / build not so good any more :thumb: keep the updates rolling in
 
#19 ·
Thanks Tom!

Not sure the hours, about 6 months.

Once the boat was built, all hardware and anything alloy was then stripped
and taken to the polisher including the motor. Hardest part was assembling
the alloy without scratching it.

Im happy with the end result.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top